Improve diesel cooling water temperature Agricultural diesel engine normal water temperature is 65-95 °C, while the current diesel engine outlet temperature is generally lower than 45 °C, so that the oil can not be completely burned, the oil viscosity, thus increasing the diesel engine operating resistance, fuel consumption. The solution is to increase the temperature of the diesel cooling water. Guarantee optimal oil advance angle The best angle of advancement angle for the 195 diesel engine is 16-20 degrees. When the diesel engine is used for a period of time, due to the wear of the plunger coupler and the injection pump transmission member, the advance angle of the fuel supply is reduced and the fuel consumption is greatly increased. The solution is to ensure that the advance angle of the fuel supply is greater than the optimal angle. Keep the machine free of oil At present, diesel engine oil pipes often have oil leakage due to uneven joint surfaces, gasket deformation or damage. Solution: 1 Apply gasket sand to the gasket and smooth it on the glass plate to calibrate the tubing connector. 2Increase the diesel recovery device. Bicycle spoke caps can be used instead of hollow screws to weld on the tank. Plastic pipes can also be used to connect the return pipe on the nozzle to the hollow screw so that the return oil flows into the tank. Oil purification before use More than half of the failures of diesel engines come from the oil supply system. Solution: 1 The diesel bought back should be set aside for 2-4 days, and 98% of the impurities in the diesel can be precipitated when it is used again. 2 If you buy it now, put two layers of silk or toilet paper on the fuel tank filler screen to remove impurities. Change the "big horse-drawn car" approach The phenomenon of “big machines with small pumps†is common on wells and is actually a waste of energy. Improvement measures: appropriately increase the number of diesel engine pulleys, increase the speed of the pump when the diesel engine is running at a reduced speed, and increase the flow, lift, and shaft power to achieve the purpose of energy saving. Adjust injector fuel injection pressure The injection pressure of the 195 diesel fuel injector is 120 kg/cm2. When the injection pressure is less than 100 kg/cm2, the fuel consumption will increase by 10-20 g/kWh. The pressure on the injection pump can be checked and adjusted directly with a comparison method. Automatic Potential Titrator,Lab Automatic Titrator,Karl Fischer Titrator,Potentiometric Titration Auto Titrator Unimedsume Trading Co., Ltd , https://www.ums-labmed.com