Due to moisture, temperature, humidity, insect pests, rodents, and microorganisms, the compound feed is damaged during storage. Therefore, appropriate measures must be taken to avoid its harm. The moisture content of feeds for controlling moisture and moisture content is generally required to be below 12%. If the moisture content is controlled below 10%, no microorganisms can grow; if the moisture content of formulated feed is more than 12%, or the air humidity is high, the compound feed will The dampness is easy to mold at room temperature. Therefore, the compound feed must be kept dry during storage. The packaging should use double bags, airtight plastic bags, and external woven bags. Storage warehouse should be dry and ventilated. Stacked in the warehouse, generally a layer of rice husks, wheat bran or straw that has been cleaned and disinfected is laid on the ground, and then straw mats or bamboo mats are laid on top of them, and then compound feeds can be piled up. To prevent pests and rodents from being used at suitable temperatures, pests multiply, consume feed and oxygen, produce carbon dioxide and water, and release heat at temperatures up to 45°C in areas where the pests are concentrated. The resulting water vapor accumulates on the surface of the formulated feed. It causes agglomeration and mildew, leading to serious deterioration. If the temperature is too high, it may also cause spontaneous combustion. Rat rodents eat feed, destroy warehouses, infect pathogens, and contaminate feed. They are more harmful animals. In order to avoid pests and rodents, before the storage of feedstuffs, the inside walls of warehouses, cracks and dead ends should be thoroughly cleaned to plug the corners of the corners and be sealed and fumigated. Limit temperature and temperature have a great influence on stored feeds. When the temperature is lower than 10°C, the growth of molds is slow. If the temperature is higher than 30°C, it will grow rapidly and the feed quality will deteriorate rapidly. The unsaturated fatty acids in the feed are high in temperature and high in humidity. In the case, it is also susceptible to oxidative deterioration. Therefore, formulated feed should be stored in a low-temperature and ventilated place. The warehouse should have heat-resistance, prevent the penetration of sunlight, radiant heat, brush the heat insulation layer on the top of the warehouse, white walls painted to reduce heat absorption, shade trees around the warehouse, and shorten the drying time.
Fuzhou Contay Biotechnology Co., Ltd is selling PQQ, PQQ Disodium Slat, Vitamin K2 MK7, Folic Acid, Co-Q10.
Dietary Supplement and Food additives Pyrroloquinoline Quinone,Pqq Acid,PQQ disodium salt, Vitamin K2 MK7 Fuzhou Contay Biotechnology Co., Ltd , https://www.contaybio.com