Dust humidifier main products can be divided into three series: single-axis dust humidifier, dual-axis dust humidifier, vertical dust humidifier, today mainly talk about the dual-axis dust humidifier. The dust humidification mixer adopts a bearing structure with high mixing efficiency. The system is small in size and small in occupation area, but has high work performance, simple structure and easy maintenance. The structural materials have better wear resistance and corrosion resistance, and Due to the good sealing performance during the operation of the system, no dust will be emitted, and the service life is much higher than that of similar products. Dust humidification mixer should pay attention to the use during use: 1. Check whether the appearance of the machine is abnormal before working. 2. Check whether the accessories are abnormal before use. 3. Add the gasoline-lubricated bearing of No. 30 or No. 40. 4. Wait for all maintenance. The position is turned on after the maintenance, do not add materials in advance, you need to wait for the dust humidifier to run normally, you can add the material. 5. When the dust humidifier is running, if there are various abnormal conditions, such as noise abnormalities, etc. At this time, we need to stop the operation immediately. After the repair is completed, the operation can be continued. 6. When the machine is stopped, it is better to keep the material processed, that is, after the machine is empty, stop it. 7. After the use is completed, Maintenance of the machine during shutdown. If it is not used for a long time, it is necessary to rinse the inside of the machine and refuel all parts.