In the daily operation of the dryer, it is inevitable that some problems will be encountered. These problems are easily solved as long as the operator has mastered the maintenance skills. Below, Wanxi Machinery will introduce some commonly used dryer troubleshooting methods.
The first problem is that the dried material does not meet the specified moisture requirements. The easiest way to solve this situation is to first control the production capacity of the dryer equipment and then increase or decrease the amount of heat supplied.
The second problem is that the rolling ring has a swinging effect on the running of the cylinder. This phenomenon occurs because the side of the concave joint of the rolling ring is not tightened. The solution is to just tighten it slightly, and the attention should not be too tight, too tight. It is easy to have an accident.
The third problem is that the gap between the large gear and the pinion of the dryer is destroyed. There are generally three reasons for this. One is that the roller is worn, the other is that the wheel is worn, and the third is that the pinion is worn. . The solution to this situation is to first analyze whether the wear is serious. If it is serious, replace it. If it is not serious, just turn it off. You can also install it on the reverse side. If you are afraid of instability, you can pair it. Replace with a new one.
The last problem is the vibration of the barrel of the dryer. There are two reasons for this. The first one is that the equipment of the equipment and the base are broken. If this is the case, just The correction can be reinforced; the second is the wear on the side of the raceway. The way to solve this glitch is to wear it according to its wear and tear. If it is not serious, it only needs to be turned. If it is serious, replace the parts.
At the same time that the dryer is widely used, people pay more and more attention to the maintenance of the dryer. Wanxi Machinery reminds relevant enterprises to improve the professional skills of the repair personnel. Only the maintenance workers and operators have improved their technical business level. The quality of the overhaul will only improve.