The sawdust is fermented into the matrix nutrient soil sawdust as long as the following treatment can be fermented into high quality nutrient soil, the operation method is as follows:
Preparation. Sawdust 2 cubic meters, 1 bag of microbial starter, 2 kilograms of urea (or replace 50-100 kilograms of poultry manure), 5 kilograms of rice bran.
Moisture. The water content of the sawdust must be determined before the amount of water can be determined. The water content of the sawdust to be fermented is adjusted to 60-65% (usually by hand, the fingers cannot fall off the water as a rough standard), and the water content is too high. Or too low are not conducive to fermentation. Then, 2 kilograms of urea were mixed with the appropriate amount of water to make a urea water reserve.
Consumables. Because it is too inconvenient to spread the material evenly, one bag of biological fermenting agent should be evenly mixed in about 5 kilograms of rice bran, so that the mixture of fermented microbial inoculant and rice bran can be increased to 6 kg. Spread evenly into the sawdust stack to be fermented.
Spread the material. The above-prepared fermented microbial inoculant and rice bran mixture are evenly mixed in the sawdust, then, the prepared urea water is sprinkled on the sawdust after being planted, and the sawdust is piled into a pile, and the rear lid is piled up. Upper breathable cover can be.
Turn over. After the sawdust is piled up for 7-10 days, the fermentation temperature reaches about 60°C. It can be turned once at a high temperature of about 60°C for 24-36 hours, and then waits until the temperature reaches 60°C. The second time it turns, the second time After turning, naturally leave it for 5-7 days. The fermentation temperature is stable below 40°C to complete the fermentation. Fermentation can be completed 25-30 days under normal conditions (post cooked can be extended to 30-45 days).

The following dimensions is: Width:750mm*Length:1500m*Thickness:25um

The 3Fagri Silage Wrap has been manufactured by Zibo Maoyang Industry and Trading CO., LTD in China, using advanced multi-layer co-extrusion blown film technology and equipment.

The silage wrap is a high performance multi-layer blown co-extruded Agricultural Stretch Film, strong and reliable. Benefiting from high tack levels, it maintains a consistent appearance both during and after wrapping. 3Fagri silage wrap is designed for trouble free when wrapping round or large square bales on a variety of forages. It can be used to preserve silage, haylage, maize and other suitable crops on all types of bale wrappers.

To make silage wrap, only 100% virgin raw materials are used. This ensures that silage wrap is more tough stretch plastic and that it wraps wider on the bale providing a better seal and giving you better quality silage.

The 3Fagri silage wrap comes with a 12-month guarantee against UV degradation, features high UV stabilization and provides an airtight and weatherproof shield, when used according to instructions.

The 3Fagri silage wrap is available in Black, Green and White.

Silage Wrap 750mm

Silage Wrap 750mm , Silage Bale Wrap,Agriculture Silage Film,Silage Stretching Wrap, Agricultural Stretch Wrap

Zibo Maoyang Industry and Trading Co.,ltd ,