Hydrophilic sponge does not contain latex,remarkably soft for less friction and drag,soft and flexible eco-friendly products.
How to Use:
Use it points side for hard-to-reach spots like around thenose and mouth, and under the eyes. Use the round base for Non Latex Sponge Non Latex Sponge, Non Latex Makeup Sponge, Beauty Sponge, Foundation Sponge
Qingdao Rongyan Cosmetic Appliance Co.,Ltd , http://www.cosmeticpuff.com
Varied size&shape and colour can be customized. gourd shape &egg shape are hot selling products.We can provide free
samples for you and you need to charge the express fee. We are a professional manufacturer and supplier of Non Latex
Sponge and Cosmetic Sponge. We provide competitive price,superb quality and satisfactory service. Non Latex Sponge,
please contact us right now!
foundation and blush on the larger areas of your face such as your forehead, cheeks and chin. You can use it with liquid or
pancake foundations if used daily. We recommend washing your sponges once a week with a mild cleanser, baby
shampoo or any low sudsing soap will work. Rinse well and air dry. Several colors are available and several shapes are
available. Red,orange,purple,fuschia,yellow,black,blue. Waterdrop,gourd shape,olive shape ,egg shape .
During the high temperature in the summer of the three seasons, the harvester is prone to water boiling and overheating of the engine, which makes it difficult for the machine to work normally, which affects the production efficiency. The reasons and remedies are as follows: 1. The radiator is not well maintained. During the working process of the harvester, the air passage in the lower part of the radiator is easy to produce blockages, and the radiator must be constantly maintained. However, in some places, there is a lack of air pump and water gun equipment, and the operators often neglect the work in this area. With the increase of time, the cooling surface will become more and more serious and even lose heat. Remedy: Remove the blockage on the air channel between the heat sinks in time. In general, compressed air can be used for cleaning. When it is difficult, it can be washed with a water gun and combined with a thin wire to clear it. However, the radiator must be dry before it can be put into use. Second, the overload operation harvester in a long time operation, the power consumption is too large, easy to cause the engine speed down, the fan speed is reduced, the lack of air volume, causing the engine to overheat. Exclusion method: Try to work in a dry field as soon as possible, and adjust the forward gear, cutting width, and cutting height of the harvester in time according to crop yield, height, and maturity. Minimize long-term overload operations. Third, the water tank is not covered by the lid causing the cooling core to block; plug a lot of operators like to let the tank open to work: to open the engine cover when the water temperature is too high can add water. In this way, the crop leaves and dust easily enter the interior of the tank, with the cooling water to reach the body and cylinder head and gradually deposited, affecting the heat, in serious cases will also cause the cooling core block, resulting in engine overheating. Remedy: In order to save the cooling and unloading time required for adding cooling water, the tank can be sealed with multi-layer gauze and fixed with lead wire to prevent crops and dust from entering the tank. Fourth, the cooling water addition method does not add cooling water to some operators often wet the heat sink, even worse, the excess cooling water is poured to the radiator. Doing so will promote the dust to adhere more easily and cause blockage and reduce the heat dissipation effect. Remedy: Do not wet the radiator when adding water, but do not splash it. The operator should correct this incorrect operation method.