Cloth Underpads,Absorbent Underpads,Protective Underpads,Washable Underpads For Adults Shandong Kangshun Daily Products Co., Ltd , https://www.centurybenifit.com
1) Use pig manure to quickly start up with body temperature of pig urine. This method is also called "starting with the occasion." After preparing the fermented mattress material with the fermentation aid, the pigs that like to pull and pull the urine are crawled away from the “relatively fixed†place (usually a few square meters) and the depth is about to open. 20-30? When the pig pulls down the hot exfoliated fresh urine, the padding material with the golden baby's fermentation aid is immediately mixed with the fresh pig manure and the mixture is crushed, then the sawdust bedding is covered and the flattened. The fresh excreta that has just been pulled down from the pig’s body has a higher body temperature, generally above 30° C. Functional microbes can use the fresh feces’ body temperature and “free†heat energy to “breverly†ferment. In this way, “foreign exchange†is started. It is fast and has good effects. Generally, it is quickly fermented and warmed up in two or three days. When the temperature rises above 40°C, it is pushed to the periphery and evenly transferred to promote fermentation of other litter. Progressively and gradually. In this way, the fermentation of the entire pigsty can start soon in the short term.
2), start with warm water in advance. After the bedding is laid, we can spray wet litter with warm water of about 30-40°C. Note that it is best to burn the water to 30-40°C directly, instead of boiling the water and cooling it to 30-40°C, then spread it again. Fermentation aids to litter can also speed up the start of fermentation.
3) Indoor preheating. First, the indoor use of fire, air conditioning or steam and other methods to warm up to 15-25 °C, and then bedding material, spread fermentation strains and other operations.
How to quickly start an efficient fermentation bed How to quickly and effectively start a pig fermentation bed is a concern for users. The functional bacteria in the pig fermentation bed fermentation auxiliaries are ideal for normal start-up temperatures of 10-15°C, at which point the microorganisms will multiply quickly. Some customer consultations do not require the addition of active agents, depending on the activity of the species. The newly produced fermentation bed strains usually have high activity and do not use active agents. The use of a certain period of fermentation bed will reduce the bacterial efficacy to a certain extent, so that some active agents can be used appropriately. Regardless of whether the active agent is used or not, care should be taken in the start-up of the fermentation bed: